Cleaning Plan: Difference between revisions

Revision as of 09:41, 5 February 2024


Items, areas to be cleaned	Frequency of Cleaning	Method of Cleaning	Chemical, Dilution and Contact Time
Production Area Floor	Weekly or as required	Mop & Bucket	Water and generic floor detergent
Cube Floor	Weekly or as required	By hand with cloth	Anti-bacterial spray
Toilet and handwashing area	Daily or as required	Toilet brush & cloth	Anti-bacterial spray, toilet bleach
Production Cores	As required	Empty and wash with cold water	N/A
Production sink (Large)	Daily or as required	Cloth	Anti-bacterial spray, bleach spray
Production sink (Small)	Weekly or as required	Cloth	Anti-bacterial spray, bleach spray
Exterior of Cube	Monthly	Cloth	Anti-bacterial spray


Items, areas to be cleaned	Method of Cleaning	Chemical, Dilution and Contact Time
Product bottles	Using dedicated bottle washer: Stack 24 bottles onto rack Place rack over cleaning nozzles Start pumps Wait at least 2 minutes Remove rack and leave to drain completely For detailed instructions see Bottle Sterilising Proceedure	Chemisphere ChemSan Self Foaming No Rinse Sanitiser Dilution: 0.2%, 10ml to 5 litres of water Minimum contact time 2 minutes
Used wine supply drums	Rinse drum & lid with water Wash drum & lid with Sanitiser Drip dry When completely dry replace lid	Chemisphere ChemSan Self Foaming No Rinse Sanitiser Dilution: 0.2%, 10ml to 5 litres of water Minimum contact time 2 minutes
Glass chemical test equipment	Every item except boiling flask: Rinse with water Boiling flask: Rinse with water, then use bleach spray, repeat if required then re-rinse	Leave bleach spray to act for 10 minutes or until solids disolved
Bottle filling spout	Remove spout from filling system Wash under running water. Use a pipe cleaner to clean inside tube. Once clean, leave in sterilisation fluid (See here for details) for at least 5 minutes. Do NOT rinse the spout. Return the spout to the filling system.	Chemisphere ChemSan Self Foaming No Rinse Sanitiser Dilution: 0.2%, 10ml to 5 litres of water Minimum contact time 2 minutes

@@ Line 58: / Line 58: @@
 * Wait at least 2 minutes
 * Remove rack and leave to drain completely
 For detailed instructions see [[Bottle sterilising procedure|Bottle Sterilising Proceedure]]
 |
 * [[ChemSan|Chemisphere ChemSan Self Foaming No Rinse Sanitiser]]
@@ Line 80: / Line 80: @@
 * Boiling flask: Rinse with water, then use bleach spray, repeat if required then re-rinse
 |Leave bleach spray to act for 10 minutes or until solids disolved
+|-
+|Bottle filling spout
+|
+* Remove spout from filling system
+* Wash under running water. Use a pipe cleaner to clean inside tube.
+* Once clean, leave in sterilisation fluid [[ChemSan|(See here for details)]] for at least 5 minutes.
+* Do NOT rinse the spout.
+* Return the spout to the filling system.
+|
+* [[ChemSan|Chemisphere ChemSan Self Foaming No Rinse Sanitiser]]
+* Dilution: 0.2%, 10ml to 5 litres of water
+* Minimum contact time 2 minutes
 |}