| Items, areas to be cleaned
|
Method of Cleaning
|
Chemical, Dilution and Contact Time
|
| Product bottles
|
Using dedicated bottle washer:
- Stack 24 bottles onto rack
- Place rack over cleaning nozzles
- Start pumps
- Wait at least 2 minutes
- Remove rack and leave to drain completely
For detailed instructions see Bottle Sterilising Proceedure
|
|
| Used wine supply drums
|
- Rinse drum & lid with water
- Wash drum & lid with Sanitiser
- Drip dry
- When completely dry replace lid
|
- Chemisphere ChemSan Self Foaming No Rinse Sanitiser
- Dilution: 0.2%, 10ml to 5 litres of water
- Minimum contact time 2 minutes
|
| Glass chemical test equipment
|
- Every item except boiling flask: Rinse with water
- Boiling flask: Rinse with water, then use bleach spray, repeat if required then re-rinse
|
Leave bleach spray to act for 10 minutes or until solids disolved
|
| Bottle filling spout
|
- Remove spout from filling system
- Wash under running water. Use a pipe cleaner to clean inside tube.
- Once clean, leave in sterilisation fluid (See here for details) for at least 5 minutes.
- Do NOT rinse the spout.
- Return the spout to the filling system.
|
|