Pest Control Activities
| Activity
|
Details of activity
|
Frequency
|
| Pest Proofing of the premises
|
Weekly walk round of premises and check visually : -
- Wire mesh screens
- Air vents
- External doors and windows
- Drain covers
|
Weekly
|
| Check & Empty Fly Killer
|
- Turn off Fly Killer at mains socket
- Put on single use gloves
- Collect waste bag
- Remove front grill from Fly Killer
- Remove & empty tray from bottom of Fly Killer into waste bag
- Use cloth and isopropyl alcohol to clean wires and internal parts
- Close Fly Killer
- Use dustpan & brush to collect any insects from the floor
- Turn on Fly Killer
- Log activity online
Note: Fly Killer will be kept turned on at all times and will be sited away from equipment and food contact surfaces
|
Weekly or as required
|
| Visual check for insects in production space
|
- As part of normal activity, keep an active look out for any sign of pests / insects.
- Record any findings.
|
Daily / Constantly
|
| Visual check for insects in Cube
|
- During any entry to the Cube, keep an active look out for any sign of pests / insects.
- Record any findings.
|
Daily / at every entry
|
| Good Housekeeping
|
- Inspect stock on delivery to make sure that there are no visible signs of damage by pests
- The premises must be managed in such a way as to enable them to be kept clean, and protected against access by pests (refer to Waste Control and Maintenance in this manual)
- Any waste should be placed in bins and removed frequently from the production area (refer to Waste Control in this manual)
- Vegetation around the outside of the premises should be kept to a minimum
|
On going
|
| Monitoring / checking and any other appropriate records
|
|
|
Return Links:
Home ¦ GMP ¦ Pest Control