Bottle sterilising procedure: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
== Procedure == | == Procedure == | ||
The following is the process for sterilising bottle prior to bottling. | |||
This procedure should only be carried out just prior to bottling. | |||
# Gather 24 labelled bottles and install them on the carrier. NEVER use less than 24 bottles. | |||
# Prepare sufficient sterilising fluid as per the manufacturer's instrtuctions to fill the sterilising tray. | |||
# Install the carrier onto the wash system. | |||
# Double check that 24 bottles are in place. | |||
# Turn on the system at the wall switch. | |||
# Start a timer for 3 minutes. | |||
# Once the timer has complete, turn the system off at the wall switch. | |||
# Allow the bottles to drain for a minute or so. | |||
# Remove the carrier and place on the draining area to the left of the sink bowl. | |||
# Allow the bottles to continue to drain until they are dry. | |||
# Deliver the carrier to the bottling station. '''DO NOT REMOVE THE BOTTLES FROM THE CARRIER'''. This is important to prevent any material from entering the bottles prior to filling. | |||
---- | ---- | ||
==== Return Links: ==== | ==== Return Links: ==== | ||
[[Home]] ¦ [[GMP]] | [[Home]] ¦ [[GMP]] | ||
Revision as of 09:39, 19 January 2024
Procedure
The following is the process for sterilising bottle prior to bottling.
This procedure should only be carried out just prior to bottling.
- Gather 24 labelled bottles and install them on the carrier. NEVER use less than 24 bottles.
- Prepare sufficient sterilising fluid as per the manufacturer's instrtuctions to fill the sterilising tray.
- Install the carrier onto the wash system.
- Double check that 24 bottles are in place.
- Turn on the system at the wall switch.
- Start a timer for 3 minutes.
- Once the timer has complete, turn the system off at the wall switch.
- Allow the bottles to drain for a minute or so.
- Remove the carrier and place on the draining area to the left of the sink bowl.
- Allow the bottles to continue to drain until they are dry.
- Deliver the carrier to the bottling station. DO NOT REMOVE THE BOTTLES FROM THE CARRIER. This is important to prevent any material from entering the bottles prior to filling.